xidpipe v0.2.5 adds PCSX2 pressure presets and aborts stuck rumble writes

xidpipe v0.2.5 adds a 100 ms rumble write timeout on modded Xbox and PCSX2 pressure presets for PC, both untested on hardware.

Xbox (original) → Xbox (original), PC (Windows), Linux / Steam Deck · Tool

olya_nro20 Nov 2026, 07:44· scout:gh

xidpipe v0.2.5 is out on November 20, 2026, for modded original Xbox consoles running nxdk homebrew and PCs on Windows or Linux. The tool streams original Xbox controller input over a local network to a virtual controller on the PC without a USB adapter, and the README notes that Claude wrote almost all of the code via Claude Code without review from an experienced Xbox homebrew or driver developer. Wired Ethernet is best, while Wi-Fi adds delay spikes.

On the Xbox side, the update fixes rumble that could keep running even after you closed the PC app or replugged the pad. Previously, a rumble write the controller never accepted blocked later writes, including commands to stop the motors. Now the Xbox aborts a write that the pad has not taken within 100 ms, and rewrites motor states every 250 ms while they run or after a failed write.

On the PC side, Setup -> Preset -> Emulator presets now offers optional profiles for PCSX2 to pass analog pressure from the Xbox face buttons. Windows users can pick pcsx2-vjoy using one vJoy device, or pcsx2 with a new pressure backend that creates two virtual Xbox 360 pads per controller, sending A, B, X, Y, White, and Black pressure on the second pad alongside matching input profiles in the release’s pcsx2 folder.

Neither change has seen real hardware testing yet. The developer notes the rumble fix is built but untested on a console, and the PCSX2 presets only ran against simulated Xbox reports rather than a physical controller in a PS2 game.

  1. Grab the Xbox zip and the windows-x64 or linux-x64 build from the releases page.
  2. Copy default.xbe over FTP to a folder like E:\Apps\xidpipe\ on your softmodded or modchipped Xbox, launch it from your dashboard, and note the IP shown on screen.
  3. Install ViGEmBus on Windows or set up /dev/uinput access on Linux, run xidpipe, and let it auto-discover the Xbox over your local network.
Sources: github.com