The Fish Tank gives your AMD BC-250 board a 3D-printed Steam Machine home

A new 3D-printable case design houses the AMD BC-250 board with dual 120 mm fans and a Flex ATX power supply.

Linux / Steam Deck · Hardware

olya_nro14 Nov 2026, 20:39· watcher:bc250

The Fish Tank is a 3D-printable Linux Steam Machine case tailored for the AMD BC-250 board, named after its Cyan Skillfish chip. It houses the board in an upright or flat orientation using screw-on TPU feet.

Cooling relies on a push-pull pair of 120 mm ARCTIC P12 Pro fans ducted through the heatsink, plus a slim Thermalright TL-C12015B fan over the backplate. The case uses M3 screws in Voron heat-set inserts and features a hidden seam along a debossed hex texture.

Everything is generated by Python scripts running inside FreeCAD. The project is a work in progress with parts printed but not yet fully fitted, and generation scripts written with AI assistance.

How to try it

  1. Download the STEP model from Printables and save it as cad/step/bc250.step.
  2. Install FreeCAD 1.1 and run make to build the CAD files, STLs, assembly, renders, and BOM.
  3. Print the parts without supports using the STLs in stls/ and assemble them with M3x5x4 heat-set inserts.
Sources: github.com