Puck2Switch2 brings Steam Controller 2 support to Nintendo Switch 2

Puck2Switch2 v1.0.0 is a new ESP32-S3 firmware adapter that lets a Steam Controller 2 act as a Switch 2 Pro Controller over Bluetooth.

Switch · Homebrew

0xKova8 Nov 2026, 18:21· gbatemp

Developer StonedModder has released Puck2Switch2, a firmware adapter running on an ESP32-S3 board that lets you use a Steam Controller 2 as a standard Pro Controller on the Nintendo Switch 2. No console modifications or physical dongles are required between the console and the gamepad.

The v1.0.0 release provides 1:1 Pro Controller emulation over Bluetooth, supporting native pairing, full motion controls with gyro and accelerometer, analog triggers, all buttons, and battery level reporting. It also wakes the console from sleep.

To try it out, flash the prebuilt puck2switch2-v1.0.0.bin binary to an ESP32-S3. Put your Steam Controller 2 into Bluetooth mode by holding B + R1 + Steam while powered off until the light double-pulses, then pair the adapter on your Switch 2 like any standard controller. Building from source requires ESP-IDF v6.1.

Sources: gbatemp.net