Numapilot 0.4.0 Drops with Expanded AMD BC-250 Telemetry and CU Tracking

Numapilot 0.4.0 updates its Linux process and hardware manager with improved AMD BC-250 telemetry, live CU tracking, and install buttons for community tools.

Linux / Steam Deck → Linux / Steam Deck · Tool

0xKova9 Nov 2026, 20:42· watcher:bc250

Numapilot, a Linux utility for managing CPU NUMA sockets, memory, and GPUs per application, has received version 0.4.0. The release fixes telemetry and extends monitoring for the AMD BC-250, an ex-mining board with a cut-down PlayStation 5 APU that people use as a Linux gaming PC.

Version 0.4.0 corrects 8-core telemetry, and the fix hint now depends on the kernel in use. The old cs_legacy_8core_metrics parameter is gone from the kernel, so users should remove it. Compute units (CUs) that the kernel unlocks through amdgpu.bc250_cc_write_mode=3 now show up in the doctor, the self-test, and the board tab. Live CU readings come from the BC250 Control Center when it is installed, instead of only the count from boot. The release warns against using live unlock together with this mode. The update also drops GPU clock readings above 3000 MHz, which come from a wrong table. The board tab gets install and update buttons for community tools: BC250 Control Center, bc250-cu-live-manager, bc250-core-unlock, bc250-core-cu-unlock, and BC250-Telemetry. It also detects bc250-efi-core-unlock but has no install button for it.

How to Try It

Users who already have the code cloned can update with the built-in command:

numapilot self-update run

Fresh tarballs are available on the numapilot GitHub releases page.

Sources: github.com