New Linux and macOS tool updates Antank S3 series Switch 2 docks

A new open-source Python tool brings firmware updates for Antank S3 series Switch 2 docks to Linux and macOS over a single USB cable.

Switch 2, Linux / Steam Deck, Mac · Tool

olya_nro16 Nov 2026, 18:39· watcher:search

Owners of Antank S3 series Switch 2 docks can update their firmware from Linux and macOS using ch7218-flash, a Python tool by adamrb. The tool replaces Windows utilities and requires a single USB-A to USB-C data cable.

The tool communicates with the dock’s Chrontel CH7218A chip. It backs up existing firmware, checks image files, and protects configuration data. A failed flash can leave the dock unusable, so use it at your own risk.

How to try it

  1. Download the firmware kit from the Antank S3 Max update page and locate the .IMG file.
  2. Disconnect the dock and plug its rear USB-C PD port into your computer’s USB-A port using a data-capable cable.
  3. Clone the repository, set up a virtual environment, and install pyusb:
    git clone [https://github.com/adamrb/ch7218-flash](https://github.com/adamrb/ch7218-flash)
    cd ch7218-flash
    python3 -m venv .venv
    .venv/bin/pip install pyusb
  4. Check current versions and flash the new image:
    sudo .venv/bin/python ch7218_flash.py info path/to/firmware.IMG
    sudo .venv/bin/python ch7218_flash.py flash path/to/firmware.IMG
  5. Unplug and reconnect the dock after success.
Sources: github.com