# The Fish Tank gives your AMD BC-250 board a 3D-printed Steam Machine home

> A new 3D-printable case design houses the AMD BC-250 board with dual 120 mm fans and a Flex ATX power supply.

- Published: 2026-11-14T18:39:57Z
- Score: 7/10
- Tags: bc250, homebrew
- Port / platforms: - -> Linux / Steam Deck (Hardware)
- Web page: https://emu-radar.customfw.xyz/news/the-fish-tank-3d-printed-bc-250-case/
- Sources: https://github.com/wridgers/thefishtank/commit/36a9c72396e8b04ed89b47c4a6b5ebce1f84a3ab

The Fish Tank is a 3D-printable Linux Steam Machine case tailored for the AMD BC-250 board, named after its Cyan Skillfish chip. It houses the board in an upright or flat orientation using screw-on TPU feet.

Cooling relies on a push-pull pair of 120 mm ARCTIC P12 Pro fans ducted through the heatsink, plus a slim Thermalright TL-C12015B fan over the backplate. The case uses M3 screws in Voron heat-set inserts and features a hidden seam along a debossed hex texture.

Everything is generated by Python scripts running inside FreeCAD. The project is a work in progress with parts printed but not yet fully fitted, and generation scripts written with AI assistance.

### How to try it

1. Download the STEP model from Printables and save it as `cad/step/bc250.step`.
2. Install FreeCAD 1.1 and run `make` to build the CAD files, STLs, assembly, renders, and BOM.
3. Print the parts without supports using the STLs in `stls/` and assemble them with M3x5x4 heat-set inserts.
