# switch-frame-tap streams Switch games to a PC at 1080p60, no capture card

> Switch homebrew streams games to a Windows or Linux PC at 1080p60 over USB or network, using the console's own H.264 encoder.

- Published: 2026-10-13T19:55:52Z
- Score: 7/10
- Tags: switch, homebrew, tool
- Port / platforms: - -> Switch (Homebrew)
- Web page: https://emu-radar.customfw.xyz/news/switch-frame-tap-switch-1080p60-stream-to-pc/
- Sources: https://github.com/TomasUribe/switch-frame-tap

A new Nintendo Switch homebrew called switch-frame-tap streams the game you're playing, picture and sound, to a Windows or Linux PC. No capture card needed. It runs as a sysmodule under [Atmosphère](https://github.com/Atmosphere-NX/Atmosphere) custom firmware. The author tested it on a Mariko Switch with firmware 22.5.0 and Atmosphère 1.11.2, and marks it experimental.

Over a USB-C cable, the stream reaches native 1920x1080 at 60 fps when the game renders 1080p, and 1280x720 at 60 fps in handheld. The USB port only works in handheld, so 1080p over USB needs ReverseNX-RT to force the docked picture. Since v0.7.0 it also streams over Wi-Fi or the dock's LAN port, so a docked console gets 1080p that way too.

The video goes through the Switch's own hardware H.264 encoder, NVENC. SysDVR, the established tool, is capped at 720p30 for game video because it reads the system's recording encoder, and that encoder's settings are fixed in firmware. This project grabs the frame earlier.

SysDVR's 30 fps ceiling comes from encoder settings fixed in firmware. This project reads the finished frame from the game's memory through the kernel debug calls that Atmosphère's cheat engine also uses, before that encoder runs. Testing so far is mostly on the author's console, plus one Switch Lite run by a user, so read the Limitations section before you install.
