# Puck2Switch2 brings Steam Controller 2 support to Nintendo Switch 2

> Puck2Switch2 v1.0.0 is a new ESP32-S3 firmware adapter that lets a Steam Controller 2 act as a Switch 2 Pro Controller over Bluetooth.

- Published: 2026-11-08T16:21:46Z
- Score: 7/10
- Tags: switch2, tool, homebrew
- Port / platforms: - -> Switch (Homebrew)
- Web page: https://emu-radar.customfw.xyz/news/puck2switch2-brings-steam-controller-2-to-switch-2/
- Sources: https://gbatemp.net/threads/puck2switch2-steam-controller-2-switch-2-pro-controller-dongle.686329/

Developer **StonedModder** has released [Puck2Switch2](https://github.com/StonedModder/Puck2Switch2), a firmware adapter running on an **ESP32-S3** board that lets you use a **Steam Controller 2** as a standard **Pro Controller** on the **Nintendo Switch 2**. No console modifications or physical dongles are required between the console and the gamepad.

The v1.0.0 release provides 1:1 Pro Controller emulation over Bluetooth, supporting native pairing, full motion controls with gyro and accelerometer, analog triggers, all buttons, and battery level reporting. It also wakes the console from sleep.

To try it out, flash the prebuilt `puck2switch2-v1.0.0.bin` binary to an **ESP32-S3**. Put your **Steam Controller 2** into Bluetooth mode by holding B + R1 + Steam while powered off until the light double-pulses, then pair the adapter on your **Switch 2** like any standard controller. Building from source requires ESP-IDF v6.1.
