# New Linux and macOS tool updates Antank S3 series Switch 2 docks

> A new open-source Python tool brings firmware updates for Antank S3 series Switch 2 docks to Linux and macOS over a single USB cable.

- Published: 2026-11-16T16:39:37Z
- Score: 7/10
- Tags: switch2, tool
- Port / platforms: - -> Switch 2, Linux / Steam Deck, Mac (Tool)
- Web page: https://emu-radar.customfw.xyz/news/ch7218-flash-switch-2-docks/
- Sources: https://github.com/adamrb/ch7218-flash

Owners of Antank S3 series Switch 2 docks can update their firmware from Linux and macOS using [ch7218-flash](https://github.com/adamrb/ch7218-flash), a Python tool by adamrb. The tool replaces Windows utilities and requires a single USB-A to USB-C data cable.

The tool communicates with the dock's Chrontel CH7218A chip. It backs up existing firmware, checks image files, and protects configuration data. A failed flash can leave the dock unusable, so use it at your own risk.

### How to try it

1. Download the firmware kit from the [Antank S3 Max update page](https://antank.net/pages/s3-max-firmware-update) and locate the `.IMG` file.
2. Disconnect the dock and plug its rear USB-C PD port into your computer's USB-A port using a data-capable cable.
3. Clone the repository, set up a virtual environment, and install [pyusb](https://github.com/pyusb/pyusb):
   ```
   git clone [https://github.com/adamrb/ch7218-flash](https://github.com/adamrb/ch7218-flash)
   cd ch7218-flash
   python3 -m venv .venv
   .venv/bin/pip install pyusb
   ```
4. Check current versions and flash the new image:
   ```
   sudo .venv/bin/python ch7218_flash.py info path/to/firmware.IMG
   sudo .venv/bin/python ch7218_flash.py flash path/to/firmware.IMG
   ```
5. Unplug and reconnect the dock after success.
