# BC-250 LED Controller Update Reads Hardware Without Extra Wiring

> The bc250_ws2812b_controller project reaches v1.38.2 with an updated module that reads hardware stats through the NCT6687.

- Published: 2026-11-04T00:31:19Z
- Score: 7/10
- Tags: bc250, tool
- Port / platforms: Linux / Steam Deck -> Linux / Steam Deck (Tool)
- Web page: https://emu-radar.customfw.xyz/news/bc250-ws2812b-controller-v1-38-2/
- Sources: https://github.com/peterdk31/bc250_ws2812b_controller/commit/5b8a5dadf243a2d8cdaed76a83eddd54af647d5e

The **bc250_ws2812b_controller** project received an update to version 1.38.2, bringing a revised **bc250_vrm** module that reads data directly through the **NCT6687** chip without requiring extra wire connections. 

Designed for the AMD BC-250 Linux gaming PC, the host daemon renders WS2812 NeoPixel LED effects based on system sensors and streams frames over USB serial to an ESP32 microcontroller. The new module keeps the daemon off a wired bus, and idle current reads zero amps. The strip needs its own 5 V supply, not the board's regulator, and the ESP32-C3 is the preferred board over a plain ESP32.

Co-authored with Claude (Anthropic), the repository also includes carrier board files for the ESP32-C3 Super Mini to handle PWM fans and ATX power switching.

### How to try it

1. Install build tools and flasher on your host:
   ```sh
   sudo pacman -S --needed base-devel
   pipx install esptool
   ```
2. Install the daemon and systemd unit from the repository:
   ```sh
   sudo make install
   ```
3. Download the prebuilt firmware and flash the receiver:
   ```sh
   sudo make flash
   ```
4. Enable and start the service:
   ```sh
   sudo systemctl enable --now led-controller
   ```
